Distribution of properties from sampling inhomogeneous materials by line transects

A theory related to the statistics of the structure and properties of inhomogeneous materials has been proposed, dealing with the distribution of properties from sampling of inhomogeneous structures by line transects. It is demonstrated that the empirical cumulative distribution functions of the intercepts from the microstructural constituents and their variances are important fingerprints of the inhomogeneous structures.Simulated sampling of the images of the microstructure by line transects has been proposed as a powerful method for characterization the distribution of properties of inhomogeneous structures. One of the advantages of the method based on the expected values of the order statistics of the intercepts is that the probability bounds of the property are determined without prior knowledge of the functional relationship between the property and the intercepts from the structural constituents.The concept intercept variance has an important application in determining the minimum transect length that stabilizes the variation of the intercept at a low value. Additionally, the concept ‘intercept variance’ can be used for topological optimization of the microstructure regarding the risk of intercepting a large amount of the weaker constituent. Equations regarding the variance of the intercepted fraction characterizing transect lengths with a specified distribution have also been derived.     

功能梯度材料

介绍了功能梯度材料的提出，开发流程，研究现状，对于当前功能梯度材料的设计过程，制备方法，性能评价方法和实验手段进行了详细叙述，提出了功能梯度材料应进一步发展的方向。     

Si基膜片型气敏传感器微结构单元的热学性能

微结构气敏传感器由于其微型化、低功耗、易阵列化和易批量生产等优点而受到国内外研究者的广泛关注。利用微机电系统（MEMS）加工技术，制备Si基膜片型微结构单元，并分析其热学性能。这种单元工作区温度为-300℃时，加热功率约75mW；并且膜片工作区的热质量很小，温度可以于毫秒量级的时间内，在室温和450℃之间调制。利用这种微结构单元，可以在温度调制方式下，研究气敏薄膜的电学特性和敏感机理。     

新型高k栅介质材料研究进展

随着半导体技术的不断发展，MOSFET（metal-oxide-semiconductor field effect transistor）的特征尺寸不断缩小，栅介质等效氧化物厚度已小至nm数量级。这时电子的直接隧穿效应将非常显著，将严重影响器件的稳定性和可靠性。因此需要寻找新型高k介质材料，能够在保持和增大栅极电容的同时，使介质层仍保持足够的物理厚度来限制隧穿效应的影响。本文综述了研究高k栅介质材料的意义；MOS栅介质的要求；主要新型高k栅介质材料的最新研究动态；展望了高k介质材料今后发展的主要趋势和需要解决的问题。     

瓷质抛光砖批量色差产生的原因与对策

从原料与生产工艺过程分析了瓷质势光砖批量色差产生的原因，并提出了相应对策，为生产质量佳化提供一定的参考。     

管材拉伸模具定径区摩擦力的探讨

管材拉伸时把模具定径区看作准塑区，利用塑性条件，研究定径区摩擦力对拉伸力的影响，并对计算公式进行探讨。证明管材空拉（减径不减壁）时摩擦力影响可忽略不计，但减径、减壁拉伸同时进行时，定径区摩擦力对拉伸力的影响就必须考虑。     

国外农用非织造布覆盖材料的应用

非织造布在现代农业生产中占有重要地位 ,非织造布作为农用覆盖材料在柑橘、草莓、茶叶、花卉、水稻和玉米育苗以及人参栽培等多方面应用较为广泛 ,本文对国外农用非织造布覆盖材料的特点、性能以及应用情况作了介绍     

Study of Friction and Wear Performance of Zinc Dialkyldithiophosphate in the Presence of Trace Ketone

This study reports the influence of methyl isopropyl ketone on the tribological performance of zinc dialkyldithiophosphate. The lubricity and friction and wear tests of 500 SN neutral base stock oil containing zinc dialkyldithiophosphate with methyl isopropyl ketone were carried out by MQ-800 four-ball and MM-200 block-on-ring tribometers respectively. The experimental results show that methyl isopropyl ketone decreases the wear resistance and the load-carrying capacity of zinc dialkyldithiophosphate. The friction reduction of zinc dialkyldithiophosphate was lowered as well because of the addition of ketone. The friction and wear mechanism of zinc dialkyldithiophosphate with trace ketone was studied by optical microscopy IR, SEM, XPS and ferrography. The variations of the tribological performance of zinc dialkyldithiophosphate with ketone could be partly attributed to the decreases of active species, such as phosphorus and zinc, which are responsible for the formation of anti-wear films, on the rubbing surface due to the existence of ketone.     

MB8镁合金薄板的搅拌摩擦焊

针对我国航空航天工业常用的MB8镁合金。采用搅拌摩擦焊工艺进行焊接，对其焊缝的成形特点、组织特征和力学性能进行分析。结果表明，采用搅拌摩擦焊焊接镁合金效果良好。     

The effect of doubly tapered strut morphology on the plastic yield surface of cellular materials

Although the literature on the mechanics of cellular materials is vast, there is no theoretical model to account for the effects of axial yielding of struts aligned to the applied loading direction on the plastic yield surface under multiaxial loading conditions. An anisotropic hexagonal model having tapered strut morphology is developed to show these effects on the plastic yield surface under multiaxial tensile loading condition. This model covers several types of cellular structure such as two-dimensional (2D) hexagonal and square cellular materials, and three-dimensional (3D) hexagonal and rhombic cellular materials of rod-like columnar structure. A tetrahedral element with tapered strut morphology is also used for a foam model to illustrate these effects on the yield surface under axisymmetric loading condition. Plastic collapse due to bending moment in the inclined struts is a dominant mode. However, under multiaxial tensile loading, the collapse due to axial yielding of struts parallel to the loading direction is found to be an important mode. The shape of plastic yield surface was found to depend not only on relative density but also on the strut morphology.